PPM Electrical Shop

ELECTRIC SHOP

Main Phone #: 818-677-2222- Fax No.: 818-677-4883 - Mail Drop 8291

IMAGE OF PPM ELECTRICIANS WORKING ON PHOTOVOLTAIC PROJECT

•	Assistant Director, Engineering Services
	Todd Haberkorn
	818-677-2037
	todd.andrew@csun.edu
•	Supervisor
	Paul Haberkorn
	818-677-2222
	paul.haberkorn@csun.edu

•	Ron Cruz	Electrician
•	Tom Edvalson	Lead Electrician
•	Tom Fredette	Electrician
•	Willy Martinez	Lead Electrician
•	Guadalupe Nunez	Electrician
•	Jeff Rawlings	Electrician
•	Paul Slater	Mason
•	John Young	Electrician

PPM's Electric shop maintains the electrical infrastructure for the entire campus, and performs work on major construction jobs, such as the Photo Voltaic Project, room remodeling, etc.

The Electric shop is responsible for the installation, repair and maintenance of campus building power, building lighting, fire alarms, emergency generators, blue light phones, swimming pool lights, lighting for parking lots, street parking and campus parking structures.

Electrical Requirements:
When selecting electrical equipment, please follow the guidelines listed below:
All standard 120 volt single phase circuits are limited to 20 amp current capacity. Equipment requiring more than 20 amps should be single phase 208/220 volts or three phase 240/480 volts (480 volt power is not available at some campus locations. Please consult PPM at extension 2222 to determine the appropriate phase and voltage for your equipment.

Utility Rooms:
PPM restricts access to electrical and mechanical rooms to its employees and others under PPM supervision. State and local fire codes prohibit storage of materials in these rooms.

Light Bulbs:
Typically, Facility Services staff replaces building light bulbs and fluorescent tubes at no charge. To have a light replaced, please call your Facility Services manager or contact Work Control at extension 2222.